New CAD features:

• SmartLEX80x3: Raster list and Production calibration for 125 and 155 Mesh implemented.
• Support for Spectrophotometer iOnePro3.

New CAM features:

• Support of new CAM device smartLEX80x3.
• Support for Spectrophotometer iOnePro3.

Solved CAD Bugs:

• Splash window progress messages are now translated.

Solved CAM Bugs:

• New job file will be removed if an error occurred during creation to avoid loading faulty jobs.
• Various improvements for calculation of milling and hoovering time for Kronos86XX.
• Splash window progress messages are now translated.
• Button descriptions of several error-, warning- and information - dialogs inside CAM plugin are now displayed in current language.
• If error occurred during output and error dialog appeared, auto power off and auto power on is working now.
• Set suction error in job startup phase if suction status is not OK or main filter has a saturation of more than 95 percent and suction unit supports this feature.
• Several disconnection to the device during engraving output should be fixed now.

Solved CAM Bugs for service technicians:

• Set correct default values on various settings for retainer 9 on Helios device (“Allow Head and Disc move over Retainer” is active and “Protect crash sensor” is set to “No permanent front”).
• Display CAM service tool only in English language.
• Disable "automatic move" buttons inside Move axis Z dialog if current position is not valid.
• Load current “channel distance interlaced” also for devices with only one available parallel channel.
• Update temperature check inside channel parameters if monitoring of temperatures were changed inside configuration settings page.
• Display of current progress inside axis test page is now working correctly.