Release Information of bestIMAGE 64 Bit Edition Patch 5.50/07

Solved CAD Bugs:

Correct update of raster correction mode from raster list to production calibration.
CAM Processing plugin: Association of separation names from 'unrasterized source file' to current separation names during offline 3D relief calculation is now working correctly.
Import TIFF: 'Rotate' option was not saved since 5.50/01

Solved CAM Bugs:

Correct update of raster correction mode from raster list to production calibration.
Import TIFF: 'Rotate' option was not saved since 5.50/01
rotaLEX6630F: It is possible again to set "Automatic" calibration mode. (This was a bug in 5.10.07).
ecoLEN 511X: Software was displaying wrong machine type 'ecoLEN 5111' ignoring the length of the machine.

New CAM features:

eco/bestLEX68xx(C), rotaLEX6630F: A dedicated errro is now displayed if Laser key switch is OFF and customer tries to calibrate.
eco/bestLEX68xx(C), rotaLEX6630F: A dedicated errro is now displayed monitored temperature (typically environment temperature) is outside warning limits and customer tries to calibrate.
eco/bestLEX68xx(C), rotaLEX6630F: A dedicated errro is now displayed if wrong polarity of sensor is detected or sensor has a short-circuit fault.
bestLEX68xxC: Both sensors (home, calibrate 'R640') ar now checked to prevent customers from taping 1 sensor for permanent good signal.

It is recommended to make backups of this files before installation: InfoMgmtBE.mdb (maybe located on a shared server location)

Installation of Patch:

This Patch can only be applied on bestIMAGE 5.50/01, 5.50/02, 5.50/03, 5.50/04, 5.50.05 or 5.50/06 !
Download this file:

Update.exe

and double click on the downloaded file Update.exe. This will start the Patch installation program which will guide you through the installation.
You have to close bestIMAGE before launching Update.exe.
The setup only was successful if you read a success message at the end of the installation !

If the installation can not be completed successfully for any reason, you have to completely uninstall all bestIMAGE software and reinstall it, otherwise an unstable configuration might be the result.