Release Information of
bestIMAGE
64 Bit Edition Patch 5.70/10
New CAM features:
- Failure of F-DS1e-x safety modules are now displayed in CAM device panel (for example if F-DS1e-x circuit braked is turned OFF but UCB want to activate the output).
- Multi gravure is now supported for DLX-devices. UV exposer will be activated only during last engraving step!
Solved CAD Bugs:
- Checking for newer patch version (Menu bar/Check for patch) is now working correctly for windows 10.
- Device assignment for pending jobs was listing duplicate device entries.
- OP101006-1342i : Reset colorset properties during changing color inside single-color control (e.g. measuring via SPM,...).
- Current Photoshop CC (up to 2017) version is supported now.
Solved CAM Bugs:
- Using local archiving settings for Job-Editor was not working.
- variLEX 81xx, 82xx has 4 pins instead of 3 in optional pin box.
- Checking for newer patch version (Menu bar/Check for patch) is now working correctly for windows 10.
- bestIMAGE startup time was about 10min in CAM mode if no device was connected.
- EngraveJobReport: Powerlimit shows wrong unit (mm instead of %).
- Display of correct error message instead of empty line in case of suction errors.
- Changing of separation with new parameters is now calculation the correct repeat width.
- Do not display the message 'cover closed and locked' for MAX device which has no cover.
- No warning message for inactive drum vacuum gets displayed now if drum vacuum gets switched on automatically by device.
- Pre engrave border can only be used for devices with no 'UV-exposing unit'.
- Increased drum-on timeout by 2 seconds to prevent 'rotation detection timeout' on machines with large and heavy drums.
- Laser service warning level was never loaded from .dev (always default 85%) for fixed-retainer machines.
- OP160906-1441i : Pending list date filter was including jobs one day before 'from' date
- OP160907-1307i : Current pending jobs local settings were not loaded if switched from 'global' to 'local' setting
- OP160907-1315i : User gets asked now if he wants to change global pending job list settings
- OP160907-1347i : A warning gets displayed that any major change for pending jobs settings (e.g.: job or archive directory change) requires CAM-Plugin to be restarted.
- OP161116-1016i : Update of 'Open Area' is now displayed correctly after screen changing.
Solved CAM Bugs (new user interface only):
- Pending jobs list was reacting very slow if there were many jobs in list (also if navigated from list to any other page).
- Button to open engraving protocol for done jobs was missing on pending jobs page (was available on legacy user interface only).
- Filter pending jobs by date was missing on pending jobs page (was available on legacy user interface only).
- Correct closing of CAM plugin (no hang up) after user interface type changing and closing of CAM plugin.
- Enable a 'modal' state for bestIMAGE application during output/preview a job to avoid collisions with other plugins.
- Display correct head position inside canvas area during testoutput mode.
- OP161111-1327i : Correct UI update and output of linked text objects for mode 'Mask out not at 1st'.
New CAM Features for service technicians:
- It is now possible to use the new LSU (LSU2) for AOM-Calibration and laser power measurement (no external MAB needed anymore)
- Improved display of large tooltips in CAMLogging-History (if too large they are clipped instead of not displayed at all)
- Improved filter function in CAMLogging-History 'Find...' dialog (filter by displayed time range)
Solved CAM Bugs for service technicians:
- Applying of drum parameters also set current 'invert rotation direction' state and would not be lost (legacy GUI mode).
- Setting of 'monitor temperature X' and 'log temperature X' for variLEX devices is now working correctly for IR and UV mode.
- Getting channel status in CAMServiceTool failed because of getting AOM driver status even if there was no AOM driver interface.
- Device-/Channel status bits were not logged since 5.70.06 (only all bits once at Logging-Service startup)
- No plate clamping bar settings are displayed now in legacy retainer settings if device does not support clamping bar
Solved CAM Bugs for service technicians (new user interface only):
- UI controls inside cooling settings page will be displayed correctly depending on 'Log temperature X' and 'Monitor temperature X'.
It is recommended to make backups of this files before installation: InfoMgmtBE.db (maybe located on a shared server location)
Installation of Patch:
This Patch can only be applied on bestIMAGE 5.70/01, 5.70/02, 5.70/03, 5.70/04, 5.70/05, 5.70/06, 5.70/07, 5.70/08 or 5.70/09!
Download this file:
Update.exe
and double click on the downloaded file Update.exe.
This will start the Patch installation program which will guide you through the installation.
You have to close bestIMAGE before launching Update.exe.
The setup only was successful if you read a success message at the end of the installation !
If the installation can not be completed successfully for any reason, you have to completely uninstall all bestIMAGE software and reinstall it, otherwise an unstable configuration might be the result.
Alternatively you may try to re-install the same patch again until it successfully completes.