Release Information of
bestIMAGE
64 Bit Edition Patch 5.70/15
New CAM features:
- Kronos 761x: It is now possible to pause output with warning message for user.
Solved CAD Bugs:
- Production process: Corrected depth handling for relief sleeve printing.
- Current Photoshop CC version (up to 2018) is supported now.
Solved CAM Bugs:
- variLEX IR: If Multi-Part-Jobs were enabled by disabling UV-Exposing unit, the head position was not correct after first part.
- Display correct 'skip full areas' inside canvas area if device has a left screen offset and/or job is a multipart job.
- CAM device connection failure during bestIMAGE startup if firmware was booting at the same time.
- Display of output preview is now working without error invalid argument if single beam on another channel than one is selected.
- Correct update of binding index for file objects with only one separation after removing of linked object.
Solved CAM Bugs (new user interface only):
- Display of output preview is now working without error invalid argument if single beam on another channel than one is selected.
- OP171129-0938i: OK button of rasterlist dialog is only enabled if one item is selected.
Solved CAM Bugs for service technicians:
- smartLEX Support-Ring detection (introduced with 5.70/14) is inverted now (input GND = no ring installed).
- BITS server address (for background upload of logging data) changed to new domain.
- A laser override error during AOM calibration wizard made AOM calibration impossible with UFX (LSU2).
It is recommended to make backups of this files before installation: InfoMgmtBE.db (maybe located on a shared server location)
Installation of Patch:
This Patch can only be applied on bestIMAGE 5.70/01, 5.70/02, 5.70/03, 5.70/04, 5.70/05, 5.70/06, 5.70/07, 5.70/08, 5.70/09, 5.70/10, 5.70/11, 5.70/12, 5.70/13 or 5.70/14!
Download this file:
Update.exe
and double click on the downloaded file Update.exe.
This will start the Patch installation program which will guide you through the installation.
You have to close bestIMAGE before launching Update.exe.
The setup only was successful if you read a success message at the end of the installation !
If the installation can not be completed successfully for any reason, you have to completely uninstall all bestIMAGE software and reinstall it, otherwise an unstable configuration might be the result.
Alternatively you may try to re-install the same patch again until it successfully completes.