Release Information of
bestIMAGE
64 Bit Edition Patch 5.90/02
New CAD features:
- Add "printed area" option to print out also the printed area in percent into print recipe dialog.
New CAM features:
- Orientation of inlay logos can be changed the same way as inlay text.
- KRONOS x61x with printing form measurement sensors: Engraving and measurement of an ‘auto depth calibration file’ is now possible at beginning of print form if absolute start of axis X was moved to another (large enough) position by ‘Confirm new zero position for axis X’.
- Assigning of ‘Industry standard 4.0’ parameters inside job wizard is now possible, if they are used
- Direct loading of ‘Industry 4.0’ files (*.i40) inside file selection dialog to open the file or job which is referenced inside the *.i40 file.
- Jobs with valid ‘Industry 4.0’ information are now displayed in the pending list.
- Added feature for mechanical drum brake at variLEX82xx.
- Loading of regions into job area is now possible via drag & drop.
Solved CAD Bugs:
- For unit mode 'imperial' all input controls of Lines/cm is now displayed in Lines/inch.
- Validity check of several 3D relief parameters only if the policies for this have also been set.
- Do not close file print dialog if open area calculation is aborted by user via escape button.
- Set correct folder path for 'Make a backup copy' folder if file was only saved with quick save and file could not be closed/saved in normal way (due to a crash or hang up or ...).
Solved CAM Bugs:
- Select correct path in file selection dialog during opening with initial filename.
- Display the same network computers in file selection dialog/page as in windows explorer.
- Increase modify raster list dialog to avoid cut text in several languages.
- Correct display of printing form measurement analyzing layer inside canvas area.
- Display ‘Industry standard 4.0’ parameters also for smartGUI.
- For unit mode imperial all input controls of Lines/cm is now displayed in Lines/inch.
- KRONOS 861x: Better description and handling of milling calibration dialog.
- Display several servo axis errors in device status panel.
- Output of ‘current job’ inside focus wizard is now also working with preprocessing mode ‘dot generated’.
- Hoovering of printing form after job aborting is now suppressed as not necessary.
- KRONOS 861x: Correct calculation of feed X during hoovering.
- Move head to home position after measuring or analyzing the printing form and after automatic depth calibration.
- Validity check of several 3D relief parameters only if the policies for this have also been set.
- Remove regions after job area size change, if regions are too large for new size.
New CAM Features for service technicians:
- Add an info button next to the ‘Right retainer width’ and ‘Right retainer width (disc)’ fields to display a graphic for better understanding what to input there.
- Insert a checksum into the machine settings file to avoid manipulation and destroying of the machine.
- Add a logging flag for interrupt counters during output.
-
Add a checkbox for ‘mill cutter rotation on’ during hoovering to be sure standstill of the mill cutter (accumulation of dirt on mill cutter during hoovering) is not responsible for different milling depths.
This is an experimental feature as it is not clear if standstill mill cutter getting dirty by hoovering is really the origin of this problem.
Solved CAM Bugs for service technicians:
- KRONOS x61x: with printing form measurement sensors: Display a warning dialog to recalibrate printing form measurement sensor if calibrated distance for circumference was changed larger than +/- 0.5 mm - if smaller, then the 'FocusSensorReferenceValueMM' was also changed to avoid wrong depth calibrations.
- KRONOS 861x: with milling and/or hoovering head: if calibrated distance for circumference was changed, then the 'MillingHeadSurfaceOffsetMm' and/or 'HooveringHeadSurfaceOffsetMm' was also changed to avoid wrong milling depth and/or head crashed on printform.
- Do not disable the’ TwinSafe loader’ and the ‘MLC project loader’ buttons if no communication to PLC is established.
- KRONOS 861x: Correct displaying and logging of beam dump temperature.
- KRONOS 861x: Reset forced values for calibrate measurement sensor after closing the calibration dialog.
- KRONOS 861x: UCB does not send SINAMICS parameter requests to AX5000 drive.
- Update hardware after set of duty cycle array to device after closing the power linearization dialog.
- KRONOS 861x: Add ‘Laser power ON time’ into LSU2 menu.
- Save ramp for axis X and Z with correct 1 time scaling from older size of 1024 to newer size of 256 entries. Ramp also will be saved now with unscaled size of 256 into .DEV and .CDS file.
(Only modified stepper motor ramps have been re-scaled at every reloading of CDS/DEV files, default ramps had no problems).
- Correct display of the device status bits in the CAM service tool if individual status bits are greater than 128.
It is recommended to make backups of this files before installation: InfoMgmtBE.db (maybe located on a shared server location)
Installation of Patch:
This Patch can only be applied on bestIMAGE 5.90/01!
Download this file:
Update.exe
and double click on the downloaded file Update.exe.
This will start the Patch installation program which will guide you through the installation.
You have to close bestIMAGE before launching Update.exe.
The setup only was successful if you read a success message at the end of the installation !
If the installation can not be completed successfully for any reason, you have to completely uninstall all bestIMAGE software and reinstall it, otherwise an unstable configuration might be the result.
Alternatively you may try to re-install the same patch again until it successfully completes.